Welcome Guest! To enable all features please Login or Register.




Go to last post Go to first unread
#1 Posted : Sunday, November 22, 2020 8:42:15 AM(UTC)

Rank: Member

Groups: Member
Joined: 10/19/2020(UTC)
Posts: 5
New Zealand
Location: Auckland

Hi there, I would REALLY like some help here.

I use my buffalo 9018 dacs for events and built the 9038. Unfortunately its just too sensitive to power to be usable for an event, need some help here. Basically loses lock and music cuts out briefly.

I solved the problem in my old Buffalo dac by getting a power conditioner, but i wanted do know what else I could do to make the SPDIF more robust.

Firstly, needs to take SPDIF Consumer level from the cd player - this is fixed. Here are some ideas..

1. Use a TTL level converter to take it to 5v maybe at the source? then into the cable and the BIIISEPro (to 5v woudl be less sensitive to voltage fluctuations)
2. Use a Wolfson SPDIF receiver - will that perform more reliably than the onboard SPDIF in the BIIISE?
3. Use the TTL converter at the DAC end - it has isolating transformers

Any other ideas?

Thanks for your help everyone!

Rss Feed  Atom Feed
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.