Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
fmak  
#1 Posted : Monday, November 10, 2008 1:08:26 PM(UTC)
fmak

Rank: Member

Groups: Member
Joined: 4/2/2008(UTC)
Posts: 15
Location: Cyprus

I wired up the switch as per the diagram and tested it.

Something odd; the switch position on the right is Input 1, then input 4, then 3, then 2.

Is this intended, or is there something wrong with the diagram?

sernikus  
#2 Posted : Wednesday, November 26, 2008 2:55:05 PM(UTC)
sernikus

Rank: Member

Groups: Member
Joined: 6/24/2008(UTC)
Posts: 3
Location: Poland

if you wire the switch exactly as in the diagram - it is wrong way. you must "step down" -shift- every wire 1 pin counterclockwise .
JPayton  
#3 Posted : Sunday, November 30, 2008 5:48:48 PM(UTC)
JPayton

Rank: Member

Groups: Member
Joined: 9/1/2008(UTC)
Posts: 3
Location: Columbus, OH

I wired and soldered the switch twice now and have not got what I expected.

Could someone draw a correct wiring diagram? This is what I want to achieve.

If the switch in the left most positon 1 to be input 1 on the MUX board
position 2 to be input 2 on the MUX board
position 3 to be input 3 on the MUX board
position 4 to be input 4 on MUX board (AES)



I wired the switch per the diagram in directions and got what the first poster said.

I thought I did what post #2 said but this was my results.

My second attempt I have pos 1 = input3
pos 2 = input2
pos 3 = input1
pos 4 = ???? (doesn't seem to work anything - xlr input is not active)

Thanks for any help anyone can offer.






Edited by user Sunday, November 30, 2008 5:54:33 PM(UTC)  | Reason: Not specified

Brian Donegan  
#4 Posted : Monday, December 1, 2008 9:03:56 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Alright. I am going down to reassess my diagram right now.
Brian Donegan  
#5 Posted : Monday, December 1, 2008 6:24:14 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Okay, I have modified the diagram. sernikus was correct. I had wired mine up, then drew the diagram the next day. When drawing it, I assumed the common pin to be in the center of it's output pins, but it is shifted to one side.

Anyway, the diagram is correct now.
n_maher  
#6 Posted : Thursday, January 1, 2009 9:03:46 PM(UTC)
n_maher

Rank: Member

Groups: Member
Joined: 7/16/2007(UTC)
Posts: 25
Location: Seacoast, NH

Somewhat related question, at least it pertains to the switch, does anyone happen to know the indexing angle for the stock rotary switch that comes with the kit? It appears to measure as 15deg., also I'm wondering if there are suitable alternates since the way I'm implementing the input switching is only for 2 inputs and the stock switch doesn't have an adjustable stop.
Brian Donegan  
#7 Posted : Friday, January 2, 2009 6:38:19 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Datasheet for the MUX switch: http://www.mouser.com/ca...specsheets/TW-700110.pdf

It's Mouser part number 105-SR2511F-34NS.

A suitable 2-pos would be 105-SR2511F-62RN.

n_maher  
#8 Posted : Wednesday, January 7, 2009 6:25:36 PM(UTC)
n_maher

Rank: Member

Groups: Member
Joined: 7/16/2007(UTC)
Posts: 25
Location: Seacoast, NH

Thanks Brian!
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.