Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
extech  
#1 Posted : Wednesday, July 27, 2016 10:14:03 PM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

is this the right way of connecting a cdpro to the teleporter plus output teleporter ?

https://www.dropbox.com/...2000%2010%2019.jpeg?dl=0

thanks, Knut
extech  
#2 Posted : Saturday, July 30, 2016 4:54:34 PM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

because my B2 setup doesn't play music, but works fine without the teleporters.

-there are no crossed cables
-the right 3 data/clock connections are in place
- i use standard cat 5 no crosscable
- power to teleporters is about 6V, onboard regs +\- 3,3V
- a gnd connection is made on the receiver side to metronome
- i tried several earth to gnd connections and gnd directly from cdpro to gnd B2
- dac and chassis have floating earth

I already bought a new pair of teleporters, in case the others are down, but don't want to damage the new ones.
extech  
#3 Posted : Saturday, July 30, 2016 5:05:27 PM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

receiving side, not much to see, bypassed both teleporters to get music,

https://www.dropbox.com/...2019%2001%2048.jpeg?dl=0
Brian Donegan  
#4 Posted : Monday, August 1, 2016 3:15:20 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
In your first picture, it looks like you are only sending one side of the LVDS signal over the CAT5 cable.
extech  
#5 Posted : Monday, August 1, 2016 3:34:11 PM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

Hi Brian, thanks for your answer.


2 SCLK O Serial clock
3 WCLK O Word clock (word select)
4 DATA O Data
5 GND O Ground

These are the outputs from the cdpro, the gnd goes the ground row at the input of the teleporter.
The other 3 are departing from the output at the A row. Which one did i miss ?
Brian Donegan  
#6 Posted : Monday, August 1, 2016 6:28:24 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
The B row. the output of the Teleporter is an LVDS signal for each channel. As a differential signal, you need two halves (+ and -). You need to connect each twisted pair of the Cat5 to the A/B pairs of outputs. Without that, the receiver is not receiving an LVDS signal, and won't be able to reconstruct the single ended I2S data.
extech  
#7 Posted : Monday, August 1, 2016 6:55:06 PM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

AHA ! I will try this out tomorrow, was thinking too analog.
I'm curious what it does to the sound because now the i2s line is about 50cm.

Have a good day Brian !
Brian Donegan  
#8 Posted : Monday, August 1, 2016 6:59:51 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Well, the odea is you keep the I2S lines as short as possible, and add needed length to the Cat5 cable instead. :)
extech  
#9 Posted : Wednesday, August 3, 2016 8:21:51 AM(UTC)
extech

Rank: Member

Groups: Member
Joined: 7/27/2016(UTC)
Posts: 6
Denmark

problem : SOLVED !


🔝. ✔️. 🔊. 🔉. 💿. 📀 🎼. 🎵. 🎶. 😎

Edited by moderator Friday, August 5, 2016 5:18:14 PM(UTC)  | Reason: Not specified

Russ White  
#10 Posted : Saturday, August 13, 2016 6:06:29 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Excellent! :)
Rss Feed  Atom Feed
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.