Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
canyoncruz  
#1 Posted : Saturday, January 23, 2016 6:54:52 PM(UTC)
canyoncruz

Rank: Member

Groups: Member
Joined: 12/9/2015(UTC)
Posts: 5
United States

Thanks: 2 times
Hello,

I received the Amanero, Hermes and S/PDIF boards. Thank you!


I received no documentation so I have a couple of questions:

1) I can see pins 3,4 &5 got from the Amanero to the S/PDIF. What is not clear is whether pin 6 or 7 does also. Can you give me the pin connections between the two boards?

2) I am thinking of incorporation the Hermes. I see it utilizes pin 6 from the Amanero. It the connection is indeed from pin 7, i can jumper from 6. Is there anything else I need to know which might exclude using the Hermes between these two boards?

3) What are the power requirements for the boards. I read from the Amanero site that board requires 0.605 W. What is the requirement for the S/PDIF transceiver?

4) If the Hermes is used and stacked to the Amanero, is there any interaction with the clocks? I have a few sheets of TI-Shield and am wondering if it is worth placing some between the two boards.

5) what are the signal levels out of the S/PDIF transceiver board?

6) The isolator IC on the Hermes includes a buffer for 50 Ohm termination.
a) Are the inputs to the S/PDIF 50 Ohm also?
b) Does this buffer add gain (Hoping) to the output?
c) Understanding the I2S lines need to be short as possible, with proper termination, could a length of 3 inches be achieved from Hermes to S/PDIF?
d) Would it help to use RG-59 cable or similar between Hermes or Amanero and the S/PDIF to transport the I2S Signal?

Thank you in advance,

CC

Edited by user Saturday, January 23, 2016 6:56:34 PM(UTC)  | Reason: typo

SCompRacer  
#2 Posted : Sunday, January 24, 2016 3:57:42 PM(UTC)
SCompRacer

Rank: Member

Groups: Member
Joined: 1/6/2012(UTC)
Posts: 305
Location: Plainfield, IL

Thanks: 11 times
Was thanked: 26 time(s) in 21 post(s)
There is no guide yet that I know of. For now everything I needed for my Amanero / Hermes / Cronus stack I found in the threads at diyaudio which means digging and sorting out what I needed. I copy it all to a word or notepad document for my own reference manual until something better shows up.

I'll try and help with what I do know or what I think may help.

1 & 2, you can download the Amanero USB pdf file which shows the pinout and technical specs. Pin 6 is MCLK. Pin 7 is DSD On. IIRC this isn't linked from the main Amanero page.

http://www.amanero.com/drivers/combo384-D.pdf

4, I can only say I don't have any issues with my stack, no shielding added. Dead quiet, no interrupts. My stack is I2S output if that makes a difference.

5d, I have cut up some older, good quality S Video cables and snagged two pieces of small diameter coax from each cable in various colors. I have used it to connect Teleporter modules to OTTO II and USB to I2S on OTTO II using pin headers. When I use coax and pin headers, all coax grounds are connected to ground pin.

UserPostedImage

If you can do one end U.fl, you can get U.fl to bare end cables. If the U.fl cable is large enough, you can use regular wire strippers to cut and trim. Digikey WM9582-ND. Other lengths / colors available in their catalog.

UserPostedImage

Edited by user Sunday, January 24, 2016 4:15:22 PM(UTC)  | Reason: Not specified

thanks 1 user thanked SCompRacer for this useful post.
canyoncruz on 2/1/2016(UTC)
Brian Donegan  
#3 Posted : Tuesday, January 26, 2016 4:19:34 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
We are working on a comprehensive user manual right now, should be done soon (sorry for the delay...it's been way too long).

For the header pin outs, here are some pics that will be in the manual.

Amanero Output Header
Amanero Output Header

Hermes Amanero Input Header
Hermes Amanero Input Header

Hermes-Amanero Output Header
Hermes-Amanero Output Header

These ones are not related to your question, but since I am posting them...

Hermes BBB Output Header
Hermes BBB Output Header

Cronus Input Header
Cronus Input Header

Cronus Output Header
Cronus Output Header

Edited by user Monday, February 8, 2016 10:09:27 PM(UTC)  | Reason: Not specified

thanks 2 users thanked Brian Donegan for this useful post.
canyoncruz on 2/1/2016(UTC), cdeveza on 9/15/2016(UTC)
canyoncruz  
#4 Posted : Monday, February 1, 2016 7:16:32 AM(UTC)
canyoncruz

Rank: Member

Groups: Member
Joined: 12/9/2015(UTC)
Posts: 5
United States

Thanks: 2 times
Thank you Brian,

One more question: From the Hermes Amanero B to the S/PDIF transceiver, what are the connections? Also, where can I pick of a 3.3 V to send back to the isolated side of the Hermes from the transceiver?

Thanks again,
CC
Brian Donegan  
#5 Posted : Monday, February 8, 2016 10:30:54 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I don't think you will be able to use the Hermes for isolation here, since the master clock is an input, not an output. You will therefore not be able to pass the Amanero MCK out to the S/PDIF Transceiver.

You can go direct from the Amanero to the Transceiver, however, like this:

GND (Pin 9) -> GND
MLCK (Pin 6) -> SCK
FSCLK (Pin 5) -> LRCK
BCLK (Pin4) -> BCK
DATA (Pin 3) -> DIN
Brian Donegan  
#6 Posted : Monday, February 8, 2016 11:00:42 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I take back what I just said. The WM8804 should not require an MCK input to act as an S/PDIF transmitter.

So, you can try this:

From the Hermes Output:

DCK_OUT (Pin 1) -> BCK
D1_OUT (Pin 2) -> LRCK
D2_OUT (Pin 3) -> DATA
GND (any) -> GND

Than tap power 3.3V from C3 (carefully).

Rss Feed  Atom Feed
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.