Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
limbik 5  
#1 Posted : Wednesday, January 6, 2016 10:48:52 PM(UTC)
limbik 5

Rank: Member

Groups: Member
Joined: 1/6/2016(UTC)
Posts: 3
Germany
Location: Kiel

i need some help with the amanero/hermes/cronus/rhea. i put all components together, flashed the amanero in slave mode - set the configuration bits... and nothing... daphile and windows found the device, but no sound. i checked all multiplier jumper, resistors, cables, conf. bites - nothing. 

i got 2 amanero boards - no board was running in the setup. then i try to use the hermes without cronus. in normal mode an in slave mode... no sound. any ideas?


kind regards
limbik 5
limbik 5  
#2 Posted : Tuesday, January 12, 2016 8:47:49 PM(UTC)
limbik 5

Rank: Member

Groups: Member
Joined: 1/6/2016(UTC)
Posts: 3
Germany
Location: Kiel

noone can help???
SCompRacer  
#3 Posted : Wednesday, January 13, 2016 6:26:31 AM(UTC)
SCompRacer

Rank: Member

Groups: Member
Joined: 1/6/2012(UTC)
Posts: 305
Location: Plainfield, IL

Thanks: 11 times
Was thanked: 26 time(s) in 21 post(s)
Like this?

UserPostedImage

Resistors in R1-R7 (either SMD or through hole resistors)? Slower clock in X1? Jumper set to 1:2?

UserPostedImage

Stacked like this?

UserPostedImage

Edited by user Wednesday, January 13, 2016 6:30:30 AM(UTC)  | Reason: Not specified

limbik 5  
#4 Posted : Sunday, January 31, 2016 6:13:41 PM(UTC)
limbik 5

Rank: Member

Groups: Member
Joined: 1/6/2016(UTC)
Posts: 3
Germany
Location: Kiel

Hello!
Yes... just like you!
can i check the hermes an Cronus seperatly without an osci?

When i only use the hermes for a function test.... do i need an 3.3V power supply for the clean side? normally it should be possibe to connect the isolated output from the hermes to my dac...

can i do the same with the cronus? directly th the amanero an than into the dac?
if it is possible i can find out whats not workling...

i was not sure about the i2s output from the cronus. can you pls give me the right pins for sdata, bckl, gnd and LRSKl? after reading over 400 postings... i still was not sure.

Thx a lot and kind regards

Edited by user Sunday, January 31, 2016 6:31:56 PM(UTC)  | Reason: Not specified

Russ White  
#5 Posted : Tuesday, February 16, 2016 3:28:49 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Sorry for the late reply - did you get it sorted?

Cronus output is marked for GND,DCK(BCK),LRCK(D1),Data(D2).
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.