Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


2 Pages<12
Options
View
Go to last post Go to first unread
thomas giz  
#21 Posted : Tuesday, June 5, 2012 10:32:58 PM(UTC)
thomas giz

Rank: Member

Groups: Member
Joined: 6/3/2012(UTC)
Posts: 4
United States
Location: CA

Or make all devices ground floating and then connect one after another to see which one is evil :-)
Your issue reminds me mine having i2s source and dac connected by ground and producing zero sound. Only after I lift ground it all works. If you experience problem with your outlets, try to measure ground potential difference between them. Pretty much it should be none but wiring done could be tricky sometimes.
Corpius  
#22 Posted : Thursday, June 7, 2012 6:12:45 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Originally Posted by: thomas giz Go to Quoted Post
Or make all devices ground floating and then connect one after another to see which one is evil :-)
Your issue reminds me mine having i2s source and dac connected by ground and producing zero sound. Only after I lift ground it all works. If you experience problem with your outlets, try to measure ground potential difference between them. Pretty much it should be none but wiring done could be tricky sometimes.


This is exactly what I did. The current setup: cd-pro --> DAC --> Pre-amp --> Power amp (is always floating)

This all floating setup works without any drop outs.

I tried the following:
  1. I tied the pre-amp to GND. A few drop outs. Not perfectly stable.
  2. Tied cd-pro to GND and the sound was completely gone. Found the most evil component :-)

The I connected a line between DAC GND and cd-pro GND. Now it became almost perfectly stable. I get the best results when the cd-pro is connected to gnd and a line goes from the DAC gnd to cd-pro gnd. No drop outs at all, even thought the wireless router is only 0.5 meter away and they is no shielding or what so ever. Oh yes, the I2C lines are about 20 cm. All not perfect conditions, but it is perfectly stable now!

When connecting both the dac and cd-pro to gnd from the wall socket it becomes unstable without the the line from DAC gnd to cd-pro gnd, although both are connected to the same GND from the socket!!? Therefore I conclude that I need a gnd line next to the cat.5 cable, just like a turntable Eh? .

Thanks for all help!
Russ White  
#23 Posted : Thursday, June 7, 2012 9:14:17 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Perfectly ok to do that, but your experience leads my to believe you may have some mains wiring issues to address. Perhaps DC on the line.
Corpius  
#24 Posted : Friday, June 8, 2012 9:07:12 AM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
I measured for DC on the line. I measured it at the socket.

Hot to cold --> It varies from -200mV to + 200mV
Hot to GND --> it varies from -40mV to + 40mV.

All audio equipment was switched off during the measurements. Router, Gigabyte switch, squeezebox and modem where not.

One other possible problem I'm thinking of is the line filter used inside the cd-pro. This is a so-called Y-fiter. Y-filters always have a small leaking current to gnd. If I find the time for it I will bypass this filter and see if this is the evil component. ;-)
thomas giz  
#25 Posted : Friday, June 8, 2012 9:09:19 PM(UTC)
thomas giz

Rank: Member

Groups: Member
Joined: 6/3/2012(UTC)
Posts: 4
United States
Location: CA

Do you use only one electrical outlet for all your audio components in i2s chain ? If not then measure if there is any existing potential difference between ground of first outlet and ground of another one. Any chance we could see your setup.


Corpius  
#26 Posted : Friday, June 8, 2012 9:46:47 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Normally I do. One socket/electrical output for all audio equipment. But for testing I connected the dac and cd-pro to another wall socket. I know that the grounds of both wall sockets meet each other in the ceiling, so in theory the ground potential should be zero. I`ll try measuring potential difference between them.

What do you want to see? The dac - cdpro?
Atm my dac is just a wooden plank with all modules on it, so there is no star gnd to the chassis and thus not to gnd of the wall socket. I can make a photo of it tomorrow, it`s a bit too late here right now to connect it just for a photo.
thomas giz  
#27 Posted : Saturday, June 9, 2012 4:40:53 AM(UTC)
thomas giz

Rank: Member

Groups: Member
Joined: 6/3/2012(UTC)
Posts: 4
United States
Location: CA

I think the photo showing your overall setup may help a little.
You mentioned that one of your configuration produces almost perfect result - is stable. Can you describe in what situation this configuration is unstable?
How do you power Teleporters ?

Corpius  
#28 Posted : Friday, June 22, 2012 6:53:18 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Hi Thomas,

I have been busy with some things. I had no time to dig into the teleporter gnd issue. I did however build all modules into the chassis. When I connected my cd-pro again via the sidecar the problem was gone. The dac is still not grounded to the mains ground, so I have still no clue what was wrong. Perhaps it has something to do with all modules now being connected to the metal chassis.

Because it all works fine right now there is no need for posting pictures of my setup.

Thank you all for all help !

felipe  
#29 Posted : Tuesday, September 18, 2012 5:15:44 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 323
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Corpius Go to Quoted Post
Hi again,

I connected the cd-pro (I2S) directly to the metronome and there was music coming from my speakers.
So the metronome in configured correctly.

See the attachments for my measurements (the scope is very old, but it works)

Attachment 1: Data
Attachment 2: Bit clock
Attachment 3: word clock


Hi Corpius,

Do you have I2S with these scope shots?

Thank you
Felipe
Corpius  
#30 Posted : Tuesday, September 18, 2012 5:38:58 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Yes, but at first when I tried using the teleporters I had to use an extra gnd line. Just like when using a phono LP player. (between the chassis of my cd-pro and gnd of the dac.


After building it into my chassis I didn't need the extra line anymore.
felipe  
#31 Posted : Tuesday, September 18, 2012 5:53:40 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 323
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
How did you set the scope: V/cm & ms or us?

Edited by user Tuesday, September 18, 2012 5:54:17 PM(UTC)  | Reason: Not specified

Corpius  
#32 Posted : Tuesday, September 18, 2012 6:40:32 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
Must have been "us"
felipe  
#33 Posted : Tuesday, September 18, 2012 6:46:16 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 323
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Youd didn't remember the ampl. volts/cm or mV/cm and how many? I need to make me an idea of your I2S output voltage.
Corpius  
#34 Posted : Tuesday, September 18, 2012 7:09:49 PM(UTC)
Corpius

Rank: Member

Groups: Member
Joined: 2/1/2012(UTC)
Posts: 332
Location: The Netherlands

Thanks: 4 times
Was thanked: 18 time(s) in 18 post(s)
No I don't remember anymore. I borrowed the scope and do not have it at home anymore. Sorry.
felipe  
#35 Posted : Tuesday, September 18, 2012 7:34:45 PM(UTC)
felipe

Rank: Member

Groups: Member
Joined: 12/6/2009(UTC)
Posts: 323
Location: Catalonia new Europe state

Thanks: 4 times
Was thanked: 1 time(s) in 1 post(s)
Don't worry thanks Corpius.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (7)
2 Pages<12
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.