Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
stewart  
#1 Posted : Saturday, July 23, 2011 11:12:25 AM(UTC)
stewart

Rank: Advanced Member

Groups: Member
Joined: 11/10/2008(UTC)
Posts: 137
Location: New York City

Thanks: 1 times
In my haste to solder everything I mounted the resistor flush with one of the tridents only to realize the two side tridents don't have the same clearance.

My question is does it matter if I mount the tridents on the bottom of the Buffalo and part of the trident touches the metal part of the output stage cap below it is that okay? Specifically I'm talking about the VDD trident.

In the picture below C3 of the VDD trident is touching the top of of the cap on the legato near R30 and R29. I'm trying to figure out if I should figure out another way to mount it, if it's safe to solder it the way it appears below or if I can put some sort of isolating material in between the two. Thanks.

Edited by user Saturday, July 23, 2011 11:14:24 AM(UTC)  | Reason: Not specified

stewart attached the following image(s):
IMG_20110723_140710.jpg (206kb) downloaded 222 time(s).
IMG_20110723_140626.jpg (154kb) downloaded 218 time(s).

You cannot view/download attachments. Try to login or register.
Audiblesoundwave  
#2 Posted : Saturday, July 23, 2011 11:45:15 AM(UTC)
Audiblesoundwave

Rank: Advanced Member

Groups: Member
Joined: 8/3/2010(UTC)
Posts: 68
United States
Location: S.F. Bay Area, CA

I believe to be on the safe side that no components touching each others unless it needs to! I mounted my Trident right side up flat and I used 22g solid core wire which could hold the whole Trident up with no problems!

Hope this helps,
Milton
stewart  
#3 Posted : Saturday, July 23, 2011 1:47:18 PM(UTC)
stewart

Rank: Advanced Member

Groups: Member
Joined: 11/10/2008(UTC)
Posts: 137
Location: New York City

Thanks: 1 times
Thanks, better safe than sorry. I bent some of the header pins. The tridents sound absolutely great.
pinnocchio  
#4 Posted : Saturday, July 23, 2011 11:10:58 PM(UTC)
pinnocchio

Rank: Member

Groups: Member
Joined: 11/3/2010(UTC)
Posts: 169
Canada
Location: Quebec

Just add some pieces of electric tape on top of the caps just to make sure there is no contacts.

Do
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.