Rank: Member
Groups: Member
Joined: 11/2/2010(UTC)
Posts: 8
Location: Slovenia
|
Hi,
after several months of sweet music from my BII, I noticed quite heavy distortion in the sound.
It suddenly appeared.
I try to change different sources, but the problem remains.
I check the power on Placid BP_HD, TP_CCS=380mA, TP_Shunt=180mA on both rails. Output voltage is set to 13,5V.
When is no sound from source, I get no distorsion. It is present only when the music is playing.
I belive, that Legato is the source of the trouble.
What are the first steps for troubleshooting this issue?
regards
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 11/2/2010(UTC)
Posts: 8
Location: Slovenia
|
Should I start with coupling caps?
|
|
|
|
|
|
Rank: Administration
Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN
Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
|
Well it might not hurt, but if you needed them you would have needed them from the start - unless something changed in the setup.
I would look for anything that might have come loose or a weak solder joint etc. Is it only from one channel or both? Does swapping channels have any effect?
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 11/2/2010(UTC)
Posts: 8
Location: Slovenia
|
I think, that I eliminate the possibility for cold solder joint, because I allready resolder everything.
The last thing I done, was connecting QN2,QN3 and QN5,QN6 for thermal conntact.
Changing channels dosen't have any impact, since distortion is present on both channels.
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 6/17/2008(UTC) Posts: 921  Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
|
Post a picture if you can.
|
|
|
|
|
|
Rank: Member
Groups: Member
Joined: 11/2/2010(UTC)
Posts: 8
Location: Slovenia
|
Update.
I manage to resolve this issue.
When I replaced wireing with silver wires, I made "stupid" mistake and swap GND and SE output on both channels.
Thank you for all for the support.
regards
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
