Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
msaywitz  
#1 Posted : Saturday, January 29, 2011 4:04:39 PM(UTC)
msaywitz

Rank: Member

Groups: Member
Joined: 11/21/2010(UTC)
Posts: 10
Location: Evanston, Illinois

There seems to be a mistake on the Parts List. The description for C3 and C4 is a .22uf capacitor. This is also the value shown on the schematic. However, in the parts list, the capacitor specified is Panasonic ECW-U1154KC9 and Digi-Key part # PCF1236CT-ND, which is a .15uf capacitor, 100V, and 10% tolerance. In addition, it is an SMD part. The pictures on the website show an SMD part, however this is for version 1.0. The current version is 1.2, and on this board C3 and C4 are through-hole parts. Mouser has WIMA Polypropylene Film capacitors, FPK-2 series (through-hole with 5mm spacing), at .22uF, 100V, at tolerances of 10%, 5%, and 2.5% and .15uF, 100V at tolerances of 5% and 2.5%. Please let me know what the correct value is, and whether or not the WIMA capacitors I have listed here are good choices.

In addition, R24 and D1 are missing from the parts list. The schematic lists the value for R24 at 10k. These two parts also appears to have been added to version 1.2.

It would be great if the pictures of the populated board could be updated to the version 1.2 board. The pictures of the populated boards are extremely helpful for those of us who are relatively new at all of this.

Edited by user Saturday, January 29, 2011 9:03:27 PM(UTC)  | Reason: Not specified

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.