Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
MartinC700  
#1 Posted : Wednesday, October 27, 2010 11:56:01 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
Here's my Buffalo II setup. One box contains the transformers, raw regulation and smoothing (Qspeed rectifiers, R-C-R-C-R-C fitering), then feeds the main box containing Placids (less the rectifiers) and Buff II / Legato. The buffalo only has a single BNC SPDIF input and is fed from a M2tech EVO. Legato is essentially the Legato 2 but with OS-CON PS decoupling caps anf Wima film output caps.

Cases are custom from Front Panel Express.

UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage

Uploaded with ImageShack.us


Cannot say enough about how good it sounds.

Edited by user Wednesday, October 27, 2010 11:58:20 PM(UTC)  | Reason: Not specified

avr300  
#2 Posted : Thursday, October 28, 2010 8:09:29 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
That's nice - very nice.
LeonvB  
#3 Posted : Friday, October 29, 2010 1:40:07 PM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
Really nice looking build.
robvanaalst  
#4 Posted : Monday, November 1, 2010 5:45:15 AM(UTC)
robvanaalst

Rank: Member

Groups: Member
Joined: 10/31/2010(UTC)
Posts: 2
Location: Norwich, VT

Nice work! Where did you get the pcb's for the raw regulation and smoothing?
MartinC700  
#5 Posted : Sunday, November 21, 2010 8:53:56 AM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
robvanaalst wrote:
Nice work! Where did you get the pcb's for the raw regulation and smoothing?


The PSU PCB's came from a group buy over on the Pinkfish Forum. They just had another group buy, so you may well find a few surplus ones if you ask over there.

Regards
jeffdavison  
#6 Posted : Monday, December 13, 2010 2:05:34 PM(UTC)
jeffdavison

Rank: Member

Groups: Member
Joined: 12/13/2010(UTC)
Posts: 13
Location: Suwanee Georgia USA

Where did you get the power switch on the front?

JD
MartinC700  
#7 Posted : Monday, December 13, 2010 9:27:47 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
jeffdavison wrote:
Where did you get the power switch on the front?

JD


Hi Jeff,

The switch was from Mouser, details below:

693-1241.6821.1120
Schurter Pushbutton Switches
Latch 12A 250VAC

Pretty expensive but very solid. They also do one that is illuminated but it is $$$

Regards
jeffdavison  
#8 Posted : Tuesday, December 14, 2010 10:47:59 PM(UTC)
jeffdavison

Rank: Member

Groups: Member
Joined: 12/13/2010(UTC)
Posts: 13
Location: Suwanee Georgia USA

Thanks Martin. Tho ex$pensive, I went with the one with an illuminated blue ring... what the hell..cool looking and this is a build I'll be living with for a while...at least until the Buffalo III ;^)

I found this on eBay from Hong Kong.... much better price, and they have alternate colors. It's nickel plated Brass and Stainless Steel..

http://cgi.ebay.com/ebay...gename=STRK%3AMEWNX%3AIT

UserPostedImage

Another question... how high is the case? On my build, I'll be using the Tridents and they take a bit more air-space. Looks like they'd be a very tight fit in your case.

Jeff

Edited by user Wednesday, December 15, 2010 12:22:19 AM(UTC)  | Reason: Not specified

MartinC700  
#9 Posted : Wednesday, December 15, 2010 7:48:50 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
Jeff,

You are right, the Tridents would not fit vertically, I ended up buying a similar pin strip header but with longer pins and mounting the Tridents horizontally. Hve to admit, the illuminated ring looks cool!

Regards
dsolodov  
#10 Posted : Sunday, January 23, 2011 5:59:12 PM(UTC)
dsolodov

Rank: Member

Groups: Member
Joined: 8/22/2010(UTC)
Posts: 38
United States

Thanks: 14 times
Martin:

Neat work! What is the part number for the plastic isolator on top of quick disconnect terminals?
MartinC700  
#11 Posted : Wednesday, January 26, 2011 10:13:26 PM(UTC)
MartinC700

Rank: Advanced Member

Groups: Member
Joined: 9/7/2010(UTC)
Posts: 43
Location: San Diego

Thanks: 1 times
dsolodov wrote:
Martin:

Neat work! What is the part number for the plastic isolator on top of quick disconnect terminals?


The isolator is part of the quick disconnect terminal. There are a number of different sizes, the Mouser page is

http://www.mouser.com/ca.../catalogUSD/642/1565.pdf

Look at the fully insulated section.

Regards
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.