Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
JKay  
#1 Posted : Sunday, July 25, 2010 11:13:46 PM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

I've just received the SE JTA kit and have a couple of questions:
+ Is there any way to fix the input impedance to 10K or it will 'automatically' vary? My source output impedance is ~1k.
Also, is there any way to bring the input impedance up to 25K? If yes, which resistors should I change?
+ I'm going to feed the JTA by DC power. Just wondering if any of these would work fine? If yes, which one would be better?

http://cgi.ebay.com/DC-5...&hash=item255af69738
http://cgi.ebay.com/DC-1...&hash=item255af69784

Edited by user Monday, July 26, 2010 8:38:38 AM(UTC)  | Reason: Not specified

Russ White  
#2 Posted : Monday, July 26, 2010 8:42:59 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
The input impedance will vary. There is no way to change that.

Either would work ok, but with one you would not need the regulator on the controller.
JKay  
#3 Posted : Monday, July 26, 2010 9:42:00 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

Russ,

Thanks for the reply.

Could you do me a favor to post the new resistor values if I want to set the input impedance to 25K? I'm using a source that has ~1k output impedance so I guess 25k would be less work for my source.
Russ White  
#4 Posted : Monday, July 26, 2010 9:46:11 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
JT would not be a good choice for a source with an output impedance that high.
JKay  
#5 Posted : Monday, July 26, 2010 9:56:03 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

d'oh!

Is there any feasible solution for this?
Russ White  
#6 Posted : Monday, July 26, 2010 9:57:02 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
You could use a buffer.
JKay  
#7 Posted : Monday, July 26, 2010 10:20:44 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

Could you point me to a simple buffer that would do the job?

Thanks
JKay  
#8 Posted : Tuesday, July 27, 2010 1:13:20 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

Russ,

I remember you said there's a resistance calculator for the JTA but I couldn't find it. Could you show me where to try it?
JKay  
#9 Posted : Tuesday, August 17, 2010 4:10:28 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

So I just finished the JTA, wiring it up to my Beta22. However, right after I turned on the music, the volume is already very loud, even when I turned the pot to minimum. Any hint for this?
Brian Donegan  
#10 Posted : Wednesday, August 18, 2010 7:39:32 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
It sounds like you may have the audio wired incorrectly. Can you post a picture?
JKay  
#11 Posted : Wednesday, August 18, 2010 7:56:24 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

Here you go:

UserPostedImage

UserPostedImage

UserPostedImage

UserPostedImage

The volumite doesn't seem to work, even when I rotated it, the sound is not louder but the relay still clicks.

Somehow I broke the connectors so I just soldered the cable onto the pins directly. I suppose they are pin-to-pin matching.
Brian Donegan  
#12 Posted : Wednesday, August 18, 2010 8:03:43 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
If the relays are clicking, then you don;t have a problem with the Volumite or Relay Controller.

The good news is that I think the answer is simple...

If you are using SE (RCAs), you need to either:

1) Connect ground to both sides of the JT, or

2) Install the jumper J! to share the ground to both sides.

As you have it, there is no ground to shunt to, so no attenuation.
JKay  
#13 Posted : Wednesday, August 18, 2010 8:23:46 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

I just jumpered J1 and now there's no sound coming out! The input and output are shorted together.Eh?

Edited by user Wednesday, August 18, 2010 8:25:04 AM(UTC)  | Reason: Not specified

Brian Donegan  
#14 Posted : Wednesday, August 18, 2010 8:27:20 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Could you post a better picture of how you have the signals attached to the relay board and connectors?
JKay  
#15 Posted : Wednesday, August 18, 2010 8:36:23 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

The connectors on both boards are in the same direction and I just soldered pin-to-pin.

UserPostedImage

UserPostedImage
Brian Donegan  
#16 Posted : Wednesday, August 18, 2010 8:40:43 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Wrong signals :). I meant the audio signals.
JKay  
#17 Posted : Wednesday, August 18, 2010 8:51:38 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

My bad :)I guess those connectors are wired correctly, right?

Basically, it's from the RCA jacks to IN terminal block and the 4 output wires to the amp. When I jumpered J1, all the 4 terminal blocks are shorted. The relays still clicks but there's no sound coming out. When I set the knob at minimum, I hear a very quiet, distant sound but when the relays began to click, the sound disappeared Eh?

Edited by user Wednesday, August 18, 2010 8:52:54 AM(UTC)  | Reason: Not specified

Brian Donegan  
#18 Posted : Wednesday, August 18, 2010 12:41:17 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
JKay wrote:
My bad :)I guess those connectors are wired correctly, right?

Basically, it's from the RCA jacks to IN terminal block and the 4 output wires to the amp. When I jumpered J1, all the 4 terminal blocks are shorted. The relays still clicks but there's no sound coming out. When I set the knob at minimum, I hear a very quiet, distant sound but when the relays began to click, the sound disappeared Eh?


From this it sounds like your ribbon cable is not correct. Also, you have no signal ground connection between the tube stage and amp?
JKay  
#19 Posted : Wednesday, August 18, 2010 8:20:09 PM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

I just rewired everything and the JTA is working perfectly now :facepalm:
Thanks for your help, Brian!
JKay  
#20 Posted : Saturday, August 21, 2010 2:56:35 AM(UTC)
JKay

Rank: Member

Groups: Member
Joined: 7/25/2010(UTC)
Posts: 13

Just curious, is it normal that even when I stopped the music, the relays still click? I do here some distortions and up-and-down volume while the music is playing.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.