Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Ichiban  
#1 Posted : Wednesday, September 19, 2007 8:37:16 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

I can only touch one of the heatsinks on the LCPS
for two or three seconds.
That LM317 feeds the digital power supplies.
Both regs are set to 7.5 volts.
Is this normal? Also, I will be adding on
a second dac board for dual mono'ing the dacs.
That will probably make the sink white hot!
Would backing off on the voltage drop solve
this? Will the digital sections low drop out
regs handle the higher voltage? How high
is safe for the dac/reciever boards?
Cheers,
Russ White  
#2 Posted : Wednesday, September 19, 2007 8:40:00 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Hmmm, something sounds not quite right..., what is your input voltage? You can safely increase the output of the LCPS to around 12V(even a bit higher).

Cheers!
Russ
Ichiban  
#3 Posted : Wednesday, September 19, 2007 8:51:13 PM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

The AC voltage into the LCPS is 13v7.
I should add that I'm currently using
a xfmr which is center tapped, which
means that the two regs share the
common center tap.
By the way the OPUS sounds very tasty
compared to my five times more expensive
and highly reguarded, by some, dac.
Burning it in with a 40cycle tone.
Russ White  
#4 Posted : Wednesday, September 19, 2007 8:55:35 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
That may be the problem right there, try just using one half of the trafo (not both) just the center tap and one hot. Power both sides of the LCPS from that same tap and center tap, in parallel. See if this makes it behave better. :)

Edited by user Wednesday, September 19, 2007 8:56:09 PM(UTC)  | Reason: Not specified

Russ White  
#5 Posted : Wednesday, September 19, 2007 8:57:17 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
BTW, Very very, glad you like it. :)
Russ White  
#6 Posted : Wednesday, September 19, 2007 9:01:31 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Further explanation, the circuit is not designed to be wired to a center tapped trafo like that. :) One secondary will work, but two is better.
Russ White  
#7 Posted : Wednesday, September 19, 2007 9:07:14 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
also, an apology, I should have the manual done by now. I will get cracking on them. :)
Russ White  
#8 Posted : Wednesday, September 19, 2007 9:11:14 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
One other option, take any hot tap and the center tap and connect it to one side of the LCPS, you should be able to run all of the modules off that one side. :) You won't come close maxing the current with 5 or 6 modules.
Brian Donegan  
#9 Posted : Thursday, September 20, 2007 3:18:17 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Note the "EDIT REPLY" feature... ;)
Ichiban  
#10 Posted : Thursday, September 20, 2007 11:03:45 AM(UTC)
Ichiban

Rank: Advanced Member

Groups: Member
Joined: 6/14/2007(UTC)
Posts: 30
Location: WesternNewYork

Thank you, heatsink now much cooler.
Will run it this way while waiting for
the torroid from TPA.
Cheers,
OneyedK  
#11 Posted : Friday, October 5, 2007 2:53:57 AM(UTC)
OneyedK

Rank: Member

Groups: Member
Joined: 9/9/2007(UTC)
Posts: 11
Location: Muizen (Belgium)

Ichiban wrote:
I can only touch one of the heatsinks on the LCPS
for two or three seconds.
That LM317 feeds the digital power supplies.
Both regs are set to 7.5 volts.


d'oh! Just noticed I have the same "problem", while using a 2x15V 80VA ILP
transformer (no center tap, two seperate windings).
2x16Vac measured with the LCPS connected to the DAC and receiver during operation.
It's the side that feeds VD that gets hot, the VA-side is cold.

I'll try changing the fase of one of the inputs to see if that matters...

/edit 1: doesn't matter

/edit 2: I also noticed that I mounted D9 and D11 upside down, guess correcting that will solve the problem -blush- Whistle

Edited by user Friday, October 5, 2007 3:19:48 AM(UTC)  | Reason: Not specified

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.