Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
Mike Lyons  
#1 Posted : Monday, December 2, 2019 11:45:26 AM(UTC)
Mike Lyons

Rank: Member

Groups: Member
Joined: 7/22/2010(UTC)
Posts: 13
Location: Bangkok

I have a dula mono set up with IV III's and a ballsie lite plus mux. Noticed on the left channel, which the volumite is connected to, the mute led is on and the lock is off Right channel [img]lock is on[/img]. Bolth channels silent. First left channel went, checked the connections then right channel died. DSC_0500 2.jpg (60kb) downloaded 529 time(s). DSC_0499 2.jpg (65kb) downloaded 530 time(s). DSC_0497.JPG (63kb) downloaded 651 time(s).. Have checked all the power supplies they seem fine. Also have led on mux. Wonder if the volumite is the issue. Any pointers appreciated. All leds on tridents on.
Brian Donegan  
#2 Posted : Monday, December 2, 2019 6:46:06 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,806
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 127 time(s) in 122 post(s)
I would start by isolating the two DAC boards and test each of them with the on-board firmware to be sure they are working in a default state.

If you fins one of them is not working as expected, check the output voltage of each Trident and AVCC.

If they are both working, add the Volumite back in and see if the problem comes back. It could be a wiring issue.
Rss Feed  Atom Feed
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.