Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
mannycala  
#1 Posted : Friday, November 27, 2015 8:32:29 PM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Dear All,
I'm building a setup with minisharc + buffalo III + 4 IVY.

I need 4Vrms out on the single ended output of the minisharc.

Actually I'm having some troubles. Changing R1-R4 to 3kOhm and r13-r16 to 356R the output doesn't seem to change. The output level is very low.

Can anyone suggest me the correct configuration?

Thanks in advance,

Marco.
mannycala  
#2 Posted : Tuesday, December 1, 2015 7:49:44 PM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Dear Russ,
can you please give me any suggestion about my problem?

Thanks,

Marco.
mannycala  
#3 Posted : Saturday, December 12, 2015 7:35:22 PM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

is it possible that noone can help me with this implementation?
avr300  
#4 Posted : Sunday, December 13, 2015 2:26:46 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Originally Posted by: mannycala Go to Quoted Post
Dear All,
I'm building a setup with minisharc + buffalo III + 4 IVY.

I need 4Vrms out on the single ended output of the minisharc.

Actually I'm having some troubles. Changing R1-R4 to 3kOhm and r13-r16 to 356R the output doesn't seem to change. The output level is very low.

Can anyone suggest me the correct configuration?

Thanks in advance,

Marco.



Let me take a stab on this one.

You said:

Quote:

I need 4Vrms out on the single ended output of the minisharc.


I guess you mean you need 4v out of the single ended output of the IVY, right ?

I don't know why you are changing R1-R4 and/or R13-R16, you tell me.

Increasing R21-R24 to 4.4k will double the voltage gain in the SE stage (from 2v to 4v).
(halving R17-R20 from 2.2k to 1.1k will do the same)

Try that and please do report your result ;-)
mannycala  
#5 Posted : Monday, December 14, 2015 9:33:52 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Of course, the 4vrms out refers to IVY, not minisharc.
Since I'm not a big expert, I'm trying to follow guides and manuals.
Therefore, from IVY Maual I found out that:
Changing R13-R16 from 180 to 356 will give 4Vrms

Moreover, from buffalo Integration manual i found that:
In 8 channel configuration R1-R4 should be changed from 750 to ~3k.

I tried to follow both changes, but with bad results (signal low and audible distortion).

Than I found a thread where Russ suggests to change R13-R16 x4 for 8 channel configuration 2Vrms.

Now the question is:
What is the best Resistors configuration to use IVY+Buffalo III, in 8 channel configuration and ~4Vrms?
mannycala  
#6 Posted : Saturday, January 9, 2016 9:20:46 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

upppp
mannycala  
#7 Posted : Thursday, January 21, 2016 7:57:57 PM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Noone that can help me with this configuration?
Noone has used buffalo in 8ch with 4 IVY??
Brian Donegan  
#8 Posted : Thursday, January 21, 2016 8:30:29 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Changing R13-16 should be used for changing the output level of the balanced outputs.

As avr300 suggested, simply changing R21-R24 to ~4.4k will double the SE output.
mannycala  
#9 Posted : Friday, January 22, 2016 8:41:02 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Ok for doubling the voltage out.
But i think it works for a 2ch configuration.
I read that 8ch configuration needs more modification on ivy because buffalo ouput is lower... can u tell me the correct change?
mannycala  
#10 Posted : Friday, March 18, 2016 11:12:45 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

uppp please
Possum  
#11 Posted : Wednesday, March 30, 2016 9:55:27 AM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
I have only done 8 channel with Legato not IVY, but the principle is the same in that you will need to quadruple gain in order to get the same volume per channel as a stereo config.

Doing both mods suggested by avr300 would appear to achieve 4 times gain:

Increasing R21-R24 to 4.4k will double the voltage gain in the SE stage (from 2v to 4v).
(halving R17-R20 from 2.2k to 1.1k will do the same)

(2 X 2 = 4 times the gain)
mannycala  
#12 Posted : Wednesday, March 30, 2016 10:22:27 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

Actually I think I need yo have the gain 8x, not 4x.
Starting point is 2ch 2vrms
Desired is 8ch 4vrms.
Therefore it is 8x i think.
but suggested modification are only for 4x
Possum  
#13 Posted : Thursday, March 31, 2016 10:59:57 AM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
Why do you think you need 4vrms? Do you need balanced or single-ended outputs?
mannycala  
#14 Posted : Thursday, March 31, 2016 11:41:44 AM(UTC)
mannycala

Rank: Member

Groups: Member
Joined: 3/5/2014(UTC)
Posts: 16
Italy
Location: Milano

it is a car audio project and I need 4vrms out in order to reduce gain on power amplifier. single ended output
Possum  
#15 Posted : Thursday, March 31, 2016 12:22:07 PM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
R21-R24 and R17-R20 are participating in a 'differential amplifier' circuit

Doubling the resistance of R21-R24 will double the voltage gain. Quadrupling the resistance will quadruple the voltage gain, and so on (theoretically)

Similarly, halving R17-R20 will double the voltage gain. Quartering the resistance will quadruple the voltage gain, and so on (theoretically)

Google 'differential amplifier'and you will find ample explanations as as to how this circuit works and how to calculate the values you need for 8 times gain

see e.g.: http://www.electronics-t...ls.ws/opamp/opamp_5.html

BTW: I have not used the MiniSHARC but have had problems with some other MiniDSP products as they suffered from lock dropouts when mated with a Buffalo DAC (you will hear random clicks and gaps in the sound if it happens to you too). Let me know how you go.

Poss
Possum  
#16 Posted : Thursday, March 31, 2016 12:24:05 PM(UTC)
Possum

Rank: Member

Groups: Member
Joined: 8/5/2012(UTC)
Posts: 208
Australia

Thanks: 4 times
Was thanked: 16 time(s) in 14 post(s)
PS: Use the same kind of high quality resistors or else you will invariably suffer a decline in audio quality
Brian Donegan  
#17 Posted : Monday, April 4, 2016 2:26:37 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Originally Posted by: Possum Go to Quoted Post
PS: Use the same kind of high quality resistors or else you will invariably suffer a decline in audio quality


Most importantly, the resistors should be matched to at least 0.1%, especially parallel parts in the balanced signal feedback loops.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.