Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
eaoyama  
#1 Posted : Friday, February 20, 2009 11:42:38 PM(UTC)
eaoyama

Rank: Member

Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP

Hello i received my volumite 20, Feb, and soldered all components.

When i tried to hook up the volumite, there was no sound in minimal and maximum, so i tried disconect volumite SCL/SDA/GND, alls fine with the DAC.

So i tried to connect the volumite when the DAC was on and worked, but if i turned off the DAC, happens again.

The autolock led is on.
Using SPDIF
All DIP switch on "+"

[]s

cya
eaoyama  
#2 Posted : Saturday, February 21, 2009 12:01:36 AM(UTC)
eaoyama

Rank: Member

Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP

Well, alls fine now...

Putted the DIP switch 3 in "-"...

tks again cya...


eaoyama  
#3 Posted : Saturday, February 21, 2009 6:26:42 AM(UTC)
eaoyama

Rank: Member

Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP

Still not working...

Don't understand, why last night worked and this mornig not?

Automute is on, and lock is off.

Russ White  
#4 Posted : Saturday, February 21, 2009 8:39:36 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
You need to be sure that the Buffalo is fully powered at the same time or before the volumite. That means you cannot use a low starting VREG. LCDPS works perfectly. So if that's what you are using you should be fine.

Make sure that the Buffalo is configured for SPDIF input as per the manual.

Check your source.

Cheers!
Russ
eaoyama  
#5 Posted : Saturday, February 21, 2009 12:42:04 PM(UTC)
eaoyama

Rank: Member

Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP

Hmm... probably was that, im using a Super Jung regulator to feed the Buffalo, and using the LCBPS to feed the Volumite.

Ill try use the Super Jung regulator to feed both.

tks
eaoyama  
#6 Posted : Saturday, February 21, 2009 1:07:34 PM(UTC)
eaoyama

Rank: Member

Groups: Member
Joined: 10/15/2008(UTC)
Posts: 21
Location: Brazil / SP

Ok now it's working, but im feeding the volumite supply with the VDD on buffalo, take it from pin RESET.

TKS

Just a question when counterpoint board will be avaliable?

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.