Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login
Extra capacitance at Tridents out?
Options
View
Go to last post Go to first unread
Previous Topic Next Topic
miero  
#1 Posted : Wednesday, October 1, 2014 8:18:00 AM(UTC)
miero

Rank: Member

Groups: Member
Joined: 10/22/2011(UTC)
Posts: 135
Location: Prague

Thanks: 1 times
Was thanked: 3 time(s) in 3 post(s)
I'm considering adding extra capacitance at output of DVCC and VDD_XO... :-/

https://drive.google.com...TmpiWGs/edit?usp=sharing
https://drive.google.com...YktoYTQ/edit?usp=sharing

Is 45uF still OK for Tridents v3.0?

But I've not tested it yet ... and I'm not sure if it will be fast enough for MHz frequencies.

Edited by user Wednesday, October 1, 2014 9:09:49 AM(UTC)  | Reason: Not specified
Back to top

Wanna join the discussion?! Login to your Twisted Pear Audio Support forum accountor Register a new forum account.
Back to top  
avr300  
#2 Posted : Wednesday, October 1, 2014 6:48:50 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Hi Miero

What are those scope shots you're showing? Output from the tridents?

Are they "in circuit" - connected to the DAC?


I can't reproduce that.

My scope is limited to 25M. It questionable if I can see the 14M trace but I will be able to see the 2M trace.

But I can't. Nothing to be seen.

Could you be picking up EMI with the probe ? Are you using a probe tip ground clip like this: probe tip ground clip

Edited by user Wednesday, October 1, 2014 6:51:44 PM(UTC)  | Reason: Not specified
Back to top
miero  
#3 Posted : Wednesday, October 1, 2014 7:35:27 PM(UTC)
miero

Rank: Member

Groups: Member
Joined: 10/22/2011(UTC)
Posts: 135
Location: Prague

Thanks: 1 times
Was thanked: 3 time(s) in 3 post(s)
Its output from DVCC and VDD_XO Tridents mounted on B3. Output on VDD and both AVCC was clean. I was not using ground clip, but ~10cm ground lead connected to probe, but I can create one and remeasure with it tomorrow.

Same situation if B3 was connected to Leggato or completely disconected from both outputs and inputs.

I've not checked that on scope before. My 1MHz DMM (obviously) did not show anything suspicious.

EDIT: B3 is powered by ~5.1V from LCDPS.

Edited by user Wednesday, October 1, 2014 7:44:07 PM(UTC)  | Reason: Not specified
Back to top
miero  
#4 Posted : Wednesday, October 1, 2014 9:01:50 PM(UTC)
miero

Rank: Member

Groups: Member
Joined: 10/22/2011(UTC)
Posts: 135
Location: Prague

Thanks: 1 times
Was thanked: 3 time(s) in 3 post(s)
Also measurement was similar with both 1:10 and 1:1 probe settings.
Back to top
miero  
#5 Posted : Thursday, October 2, 2014 6:44:56 AM(UTC)
miero

Rank: Member

Groups: Member
Joined: 10/22/2011(UTC)
Posts: 135
Location: Prague

Thanks: 1 times
Was thanked: 3 time(s) in 3 post(s)
I've repeated my measurements with DIY probe tip ground clip and the waveforms were the same as above.

So I've reused 47uF capacitors from the old Tridents and put them on affected outputs.

Voltages seems to be fine now.

https://drive.google.com...d3p5NUE/edit?usp=sharing
Back to top
Rss Feed  Atom Feed
Users browsing this topic
GuestUser
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Youtube
Copyright © Twisted Pear Audio