Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
vitali  
#1 Posted : Friday, November 30, 2012 11:07:19 AM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

I have a problem.
I listen only balanced out.
The XLR have different voltages: 1.6 V and 1.5 V.
A speaker plays louder ...
How do I resolve?

Thanck you!
Russ White  
#2 Posted : Saturday, December 1, 2012 1:57:46 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Double check all your jumpers and solder joints.
vitali  
#3 Posted : Saturday, December 1, 2012 9:21:37 AM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

Thanks Russ.
But I think I have experience in soldering :):)

http://s775.beta.photobu...Buffalo22/library/?http%


I have four Legato3 and all have difference in output XLR.
1.602V - 1.522 V
1,624 V - 1,528 V
1,618 V - 1,509 V
1,608 V - 1,514 V

My speakers Coral 10 feel the difference.

Edited by user Saturday, December 1, 2012 9:28:21 AM(UTC)  | Reason: Not specified

Russ White  
#4 Posted : Saturday, December 1, 2012 2:10:57 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
I don't ever assume a person knows how to solder. :)

Have you measured the DAC output directly - with no legato.
Russ White  
#5 Posted : Saturday, December 1, 2012 2:38:47 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
It would have been helpful to know that you were running dual mono with B-II :)

One possibility is that the output of each of your AVCC modules is slightly different. Which revision of AVCC are you using?

Measure the output of each.
vitali  
#6 Posted : Monday, December 3, 2012 9:31:56 AM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

Excuse the delay in responding,the national day I was out in the mountains :)
Today I'll do measurements and return with a message!

Thanks.
vitali  
#7 Posted : Monday, December 3, 2012 5:33:19 PM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

Hi Russ,

We measured.
On the right AVCC (V-1.0) 3.28 V , and left AVCC(V-1.0) - 3,26V.
Russ White  
#8 Posted : Monday, December 3, 2012 7:54:22 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Hmm. That is pretty close.

You are using a single Legato and two DACs?
vitali  
#9 Posted : Tuesday, December 4, 2012 5:36:31 AM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

Hi Russ:) ,

I use a single Legato 3.


Russ White  
#10 Posted : Tuesday, December 4, 2012 12:51:57 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
If you swap the addresses of the two DACs does the change follow the DAC?
vitali  
#11 Posted : Tuesday, December 4, 2012 5:33:24 PM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

I changed addresses in every way.
But I always to exit Legato3: left 1.6 V - Right 1.5 V :(
Russ White  
#12 Posted : Tuesday, December 4, 2012 7:43:03 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
I see... Then we can rule out a difference in the DAC volume register.

How is the legato loaded? Are you measuring with no load?

It could be that the gain resistors are not well matched, but this seems a big difference for that.

What resistor values are you using and what tolerance?
vitali  
#13 Posted : Wednesday, December 5, 2012 8:30:16 AM(UTC)
vitali

Rank: Member

Groups: Member
Joined: 6/1/2010(UTC)
Posts: 36

Legato is connected via 10mkf BG-N with F5X balanced (EUVL amp)
Measurements - we made no connection to the amplifier.
Resistors are 1% tolerance, I checked again and it is.
I used R1-R4 180R / 1% R21-R24 10K / 1%
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.