Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
AndC  
#1 Posted : Monday, September 10, 2012 3:03:32 PM(UTC)
AndC

Rank: Member

Groups: Member
Joined: 9/10/2012(UTC)
Posts: 3
Italy

Many thanks to Russ and Brian for their work, i use the buffalo III + legato as monitoring dac during recording and mixing, i am very satisfied. Compared with my references the buffalo is more extended and controlled in the low and hi frequencies, you are able to perceive and shape the reverbs with great accuracy, and you have a completely new vision on the music you're listening to.

really a great converter !!!

more photos: http://www.flickr.com/photos/acmrecording/

Edited by user Monday, September 10, 2012 4:20:12 PM(UTC)  | Reason: Not specified

AndC attached the following image(s):
Buffalo III Dac front.jpg (113kb) downloaded 216 time(s).
Buffalo III Dac over.jpg (117kb) downloaded 271 time(s).
Buffalo III Dac back.jpg (109kb) downloaded 195 time(s).

You cannot view/download attachments. Try to login or register.
Russ White  
#2 Posted : Monday, September 10, 2012 9:05:45 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Excellent work! I am very pleased it is performing well for you.
Takaji  
#3 Posted : Monday, September 10, 2012 9:07:12 PM(UTC)
Takaji

Rank: Member

Groups: Member
Joined: 7/22/2011(UTC)
Posts: 22
Location: Winnipeg

Thanks: 1 times
Nice build! Really simple and clean. I'm curious where the headphone jack's wires are going to?

I've got 5x IVY boards in my BIII build (4 for 8-channel output, 1 for stereo output) and it would be great to include a headphone jack for active monitoring through the DAC. Is it possible?
gwikse  
#4 Posted : Tuesday, September 11, 2012 9:31:22 AM(UTC)
gwikse

Rank: Member

Groups: Member
Joined: 1/19/2011(UTC)
Posts: 332
Location: Oslo, Norway

Thanks: 14 times
Was thanked: 17 time(s) in 17 post(s)
Nice and clean looking build. Nice to see that someone actually fitted it in a 1U chassis. Does it get very hot?
AndC  
#5 Posted : Tuesday, September 11, 2012 2:36:44 PM(UTC)
AndC

Rank: Member

Groups: Member
Joined: 9/10/2012(UTC)
Posts: 3
Italy

Thank you all for the compliments Angel

Takaji,
if you want a headphone output, you need a Legato 3.1, he has an output buffer to drive headphones, or alternatively an headphone amp like the ventus, but probably you will need an additional power supply to provide the extra current

gwikse,
in a rack unit gets very hot, but so far have never had problems, i have a mobile recording studio, and for me space and weight are very important, in the future I would use a more vented cover...
Brian Donegan  
#6 Posted : Tuesday, September 11, 2012 3:11:29 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Originally Posted by: Takaji Go to Quoted Post
Nice build! Really simple and clean. I'm curious where the headphone jack's wires are going to?

I've got 5x IVY boards in my BIII build (4 for 8-channel output, 1 for stereo output) and it would be great to include a headphone jack for active monitoring through the DAC. Is it possible?


You asked the same question over at DIYAudio. Just tap the SE output from the IVY for your headphones.
thanks 1 user thanked Brian Donegan for this useful post.
Takaji on 9/13/2012(UTC)
gwikse  
#7 Posted : Wednesday, September 12, 2012 7:26:26 AM(UTC)
gwikse

Rank: Member

Groups: Member
Joined: 1/19/2011(UTC)
Posts: 332
Location: Oslo, Norway

Thanks: 14 times
Was thanked: 17 time(s) in 17 post(s)
Originally Posted by: AndC Go to Quoted Post
Thank you all for the compliments Angel

Takaji,
if you want a headphone output, you need a Legato 3.1, he has an output buffer to drive headphones, or alternatively an headphone amp like the ventus, but probably you will need an additional power supply to provide the extra current

gwikse,
in a rack unit gets very hot, but so far have never had problems, i have a mobile recording studio, and for me space and weight are very important, in the future I would use a more vented cover...


Are you using a modu (hifi2000) slimline case with Front panel express front and rear?
If so you can proporably get a vented cover from modushop?

SCompRacer  
#8 Posted : Wednesday, September 12, 2012 5:40:45 PM(UTC)
SCompRacer

Rank: Member

Groups: Member
Joined: 1/6/2012(UTC)
Posts: 305
Location: Plainfield, IL

Thanks: 11 times
Was thanked: 26 time(s) in 21 post(s)
Nice job!
Brian Donegan  
#9 Posted : Wednesday, September 12, 2012 6:25:25 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
It is a very nice job. and a great example of how it should be done.
AndC  
#10 Posted : Wednesday, September 12, 2012 7:08:49 PM(UTC)
AndC

Rank: Member

Groups: Member
Joined: 9/10/2012(UTC)
Posts: 3
Italy

Thank you Brian and SCompRacer,

I use a modu slimline case 230 mm deep with Front panel express front and rear, unfortunately modushop don't have a more vented cover for this measure in the slimline series...
Takaji  
#11 Posted : Thursday, September 13, 2012 12:54:31 AM(UTC)
Takaji

Rank: Member

Groups: Member
Joined: 7/22/2011(UTC)
Posts: 22
Location: Winnipeg

Thanks: 1 times
Originally Posted by: Brian Donegan Go to Quoted Post
You asked the same question over at DIYAudio. Just tap the SE output from the IVY for your headphones.


Yeap I did; figured posting on two forums was better than on one! :)

Thank you for the information! I never actually thought about that... I don't know why not, really! :P
SCompRacer  
#12 Posted : Saturday, September 15, 2012 7:58:51 PM(UTC)
SCompRacer

Rank: Member

Groups: Member
Joined: 1/6/2012(UTC)
Posts: 305
Location: Plainfield, IL

Thanks: 11 times
Was thanked: 26 time(s) in 21 post(s)
Originally Posted by: Takaji Go to Quoted Post
Originally Posted by: Brian Donegan Go to Quoted Post
You asked the same question over at DIYAudio. Just tap the SE output from the IVY for your headphones.


Yeap I did; figured posting on two forums was better than on one! :)



When we don't know, I guess we really want instant gratification with them answers. : )

Takaji, did you have modushop/Hifi2000 do the CNC for you? I am looking for HPGL files for the Neutrik connectors.
Takaji  
#13 Posted : Friday, September 21, 2012 7:01:20 PM(UTC)
Takaji

Rank: Member

Groups: Member
Joined: 7/22/2011(UTC)
Posts: 22
Location: Winnipeg

Thanks: 1 times
Originally Posted by: SCompRacer Go to Quoted Post
Takaji, did you have modushop/Hifi2000 do the CNC for you? I am looking for HPGL files for the Neutrik connectors.


I bought a case from Hifi2000 (2U tall 10mm front panel), but I'm planning on getting the CNC done elsewhere - I have grandiose plans for the front panel (blued steel) that I'm still trying to realise :)

I did however make a mockup of my back panel, using AutoCAD and the digital drawings available from Neutrik's website. Is this not suitable for your application?
SCompRacer  
#14 Posted : Thursday, September 27, 2012 12:27:24 AM(UTC)
SCompRacer

Rank: Member

Groups: Member
Joined: 1/6/2012(UTC)
Posts: 305
Location: Plainfield, IL

Thanks: 11 times
Was thanked: 26 time(s) in 21 post(s)
Originally Posted by: Takaji Go to Quoted Post

I did however make a mockup of my back panel, using AutoCAD and the digital drawings available from Neutrik's website. Is this not suitable for your application?


I only have Frontpanelexpress and cannot import those files. I wouldn't know how to use Autocad if I had it. I am software challenged. ;)
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (4)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.