Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


2 Pages<12
Options
View
Go to last post Go to first unread
ed linssen  
#21 Posted : Wednesday, March 7, 2012 3:17:24 AM(UTC)
ed linssen

Rank: Member

Groups: Member
Joined: 2/16/2009(UTC)
Posts: 35
Location: netherlands

Thanks: 1 times
christensenleif@msn.com wrote:
I resoldered the whole board
best
Leif

What do you mean by saying this?
Are your problems solved now, or not?
regards,
ed
christensenleif@msn.com  
#22 Posted : Wednesday, March 7, 2012 3:56:12 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

no it was only a reply to exclude cold solder joint as possible/likely problem
still minus 1,11-1,2 vdc on both se and bal out when hooked up with piggybacked BIII board
best
Leif
Russ White  
#23 Posted : Wednesday, March 7, 2012 6:22:58 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
On just one channel?
christensenleif@msn.com  
#24 Posted : Wednesday, March 7, 2012 6:47:36 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

yes faulty on just one channel
but whole board was resoldered/"soldered over"
best
Leif
Russ White  
#25 Posted : Wednesday, March 7, 2012 8:08:16 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Ok, well I supposed you could replace all the transistors on the dead side. You might be able to find the killed one if you have a semiconductor analyzer, but that may not work with the parts "in circuit".
christensenleif@msn.com  
#26 Posted : Wednesday, March 7, 2012 8:23:05 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

first I´ll build the L3 that now waits in the norw customs and test
if all well, I´ll either just cut them all out(easier) and order new ones, or test them in my multimeter with that feature and replace
surprises me though, that the minus 1,1 vdc in one channel on both se and bal doesn´t give any indication

best
Leif
christensenleif@msn.com  
#27 Posted : Friday, March 9, 2012 11:36:30 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

second L3 inhouse and waiting to be assembled
I´ll be back
best
Leif
christensenleif@msn.com  
#28 Posted : Saturday, March 10, 2012 10:22:26 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

hello
new L3 is installed trimmed and singing
what now with the faulty one?
do I just replace all mosfets?
best
Leif
avr300  
#29 Posted : Saturday, March 10, 2012 11:18:48 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
Hi Leif..

Why don't you try running with only 1 FET per half channel.

Then you can swap FET's until you find the faulty one(s).

Edited by user Saturday, March 10, 2012 11:41:52 AM(UTC)  | Reason: Not specified

christensenleif@msn.com  
#30 Posted : Saturday, March 10, 2012 2:16:54 PM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

good point
thxs
best
Leif
christensenleif@msn.com  
#31 Posted : Monday, March 12, 2012 12:42:50 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

what do you reckon Russ?
should I just replace the Mosfets?
the cost is close to nothing, and if I knew it would cure this shitty fault, it´s definitely worth it, instead of spending more time on this
best
Leif
christensenleif@msn.com  
#32 Posted : Saturday, March 24, 2012 8:12:37 AM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

all transistors replaced on LCH
all works perfect
case solved
HURRAH!
thxs guys
have a nice weekend
best
Leif
Norway
Erlend Sæterdal  
#33 Posted : Saturday, March 24, 2012 9:11:56 AM(UTC)
Erlend Sæterdal

Rank: Member

Groups: Member
Joined: 7/27/2008(UTC)
Posts: 158


So you use the LME 49600 buffer ! ? Maybe I will use the jumpers to avoid it. I use the Dexa discret opamp but think the Burson is better !
christensenleif@msn.com  
#34 Posted : Sunday, March 25, 2012 1:44:04 PM(UTC)
christensenleif@msn.com

Rank: Member

Groups: Member
Joined: 11/21/2008(UTC)
Posts: 314
Location: Norway

I don´t have the buffers at all
best
Leif
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (5)
2 Pages<12
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.