Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


2 Pages<12
Options
View
Go to last post Go to first unread
Russ White  
#21 Posted : Sunday, February 20, 2011 7:15:21 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Nothing on the DAC side of things. :)
kpavey  
#22 Posted : Monday, February 21, 2011 4:44:07 AM(UTC)
kpavey

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 26
Location: Melbourne, Australia

OK, pics at last...and some notes

* Preliminary layout until I fit everything in (HiFace USB to replace dddac.de USB-I2S and Tent Clock modules) powered by its own bridge and 15kuf Jensen 4 pole capacitor - unregulated (and probably should be)
* Extra rectifier bridge not used - a carryover from the last project
* Lundahl 1527XL transformers - wired in parallel each side to reduce op impedance (not that relevant to this issue)
* Placid installed today (old version) - set to around 327mA and 5.5V
* Note - despite the switch on the PSU (Brian suggested I add to ensure the firmware/Vol and Buff 2 were synced) and the Placid supply the Volumite still doesn't work properly
* Automute LED is now not on and lock is - which is normal. (Flash makes it look like Automute is lit but it is not)
Buff 2 Pics - initial implementation

Did this help troubleshoot things? Cheers.

Edited by user Monday, February 21, 2011 4:47:16 AM(UTC)  | Reason: Not specified

NicMac  
#23 Posted : Monday, February 21, 2011 10:22:01 AM(UTC)
NicMac

Rank: Advanced Member

Groups: Member
Joined: 2/10/2009(UTC)
Posts: 299
Location: Italy

Haven't you wired the positive supply line (usually red) to the GND pad in stead of VCC on Volumite?
Cheers,
Nic

EDIT. No - it seems wired the same (red = GND) on Buffalo.

Edited by user Monday, February 21, 2011 10:27:39 AM(UTC)  | Reason: Not specified

avr300  
#24 Posted : Monday, February 21, 2011 2:10:08 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
kpavey - do you have access to an oscilloscope ?
kpavey  
#25 Posted : Monday, February 21, 2011 2:25:46 PM(UTC)
kpavey

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 26
Location: Melbourne, Australia

Hi AVR

Yes I have an old ex Saudi Airforce Tektronics 475 CRO. A couple of broken knobs but she works OK. What did you have in mind?
avr300  
#26 Posted : Monday, February 21, 2011 2:34:24 PM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
I once had similar problem. It turned out that it was a faulty (programmed) Atmel.

Try to measure the digital lines. SCL will continuously send a clock signal. SDA will continuously send the digital representation of the pot position. In other words, both lines will be "live" all the time.
kpavey  
#27 Posted : Monday, February 21, 2011 3:50:24 PM(UTC)
kpavey

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 26
Location: Melbourne, Australia

Thanks for the tips AVR

Is the clock signal the same as BCLK? I guess it's unlikely to need to be anywhere near that fast.

Followup - can only measure what I'd describe as noise - 50-200mV max, period around 1us, generally sinusoidal but nothing constant and repeatable like you'd expect a clock to be. Similar rubbish on both SDA and SCL.

Then....

I was swapping in my valve preamplifier late tonight, and went to try the Volumite on the odd chance it would work. And now it does. I did NOT change anything in the DAC at all, I left it on whilst changing out front end preamplifiers. Very odd. Hopefully it stays this way. Hmmmm. The pot is not that linear in its response, seems like a 30dg turn from full on takes out 85% of the volume. I assume that's normal?

Edited by user Tuesday, February 22, 2011 5:17:39 AM(UTC)  | Reason: Not specified

avr300  
#28 Posted : Wednesday, February 23, 2011 10:30:11 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
It's normal. It's not implemented linear, but logarithmic.
kpavey  
#29 Posted : Thursday, February 24, 2011 8:00:48 AM(UTC)
kpavey

Rank: Member

Groups: Member
Joined: 1/4/2011(UTC)
Posts: 26
Location: Melbourne, Australia

But.the pot IS linear right?
avr300  
#30 Posted : Thursday, February 24, 2011 8:20:54 AM(UTC)
avr300

Rank: Member

Groups: Member
Joined: 6/17/2008(UTC)
Posts: 921
Denmark

Thanks: 1 times
Was thanked: 70 time(s) in 69 post(s)
So it say in the BOM.

"5K Linear"
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
2 Pages<12
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.