Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
Erik  
#1 Posted : Friday, March 26, 2021 2:43:46 PM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

Hello,

I have got a problem with my OTTO2. the setup = toslink> S/PDIF Transceiver Module > metronome >B2 DAC. Without the Otto the sound is good but with it there is almost no music and a lot of crackling sound. The I2s lines are about 8cm totally, coax or single wire made no difference. Especially the BCK wire is very sensible. When i connect that wire directly from Tranceiver module to the metronome all static is gone. That wire is 7cm in length. Hopefully it's not the lenght of the i2s wires.... IMAG4924.jpg (116kb) downloaded 16 time(s).
Brian Donegan  
#2 Posted : Monday, March 29, 2021 1:42:50 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
Wire length, by itself, is not a factor. The I2S lines can be different lengths without any issues (within reason). Light speed covers a few centimeters pretty quickly compared to the data rates we are talking about.

What IS important, and what wires are nearby the data lines. Any power wire will pick up noise from the data lines, especially bit clock, which is particularly noisy, but all can be offenders. You want to keep them from crossing each other and away from power leads.

What are those wires running under the OTTO? That might be the cause of the noise.

[EDIT] Also, the I2S wires are really close to the signal output wires, also a likely cause of noise.

Edited by user Monday, March 29, 2021 1:46:18 PM(UTC)  | Reason: Not specified

Erik  
#3 Posted : Monday, March 29, 2021 6:20:22 PM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

Thank you very much for answering Brian,

So you think those data wires "broadcast" noise into the powersupply wires which results in crackling sound?
That should explain why my CDPRO cable never gave any problems, even before the use of Transporters.
Those wires underneath are indeed powerleads for everything except the B2 DAC.
I changed the position of the OTTO, soldered it directly on the transceiver module and used coax for every signalwire.
The coaxcable is the same what is used for Wlan in laptops.

That helped a lot but the sound still spikes.

Does it help to use shielded powerleads & signalwire or use a small resistor 33Ohm in the every I2s wire ?

Best regards, Erik.

IMAG49c28.jpg (165kb) downloaded 15 time(s).

Edited by user Monday, March 29, 2021 6:32:43 PM(UTC)  | Reason: Not specified

Erik  
#4 Posted : Sunday, April 4, 2021 11:02:51 AM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

IMAG4936-20210404-12515342.jpg (183kb) downloaded 5 time(s). IMAG4937-20210404-125152812.jpg (220kb) downloaded 6 time(s).


Okay, i solved it..... It's a fault in the WM8804 manual. AIFCONF1 en AIFCONF0 are swapped on the board, don't follow the text just set the tristate as 1-0-0-1.

Sigh!
Brian Donegan  
#5 Posted : Monday, April 5, 2021 1:48:59 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I did some checking and the error is actually in the silk screen of the new version of the board. Nice catch.

Sorry about that.
Erik  
#6 Posted : Monday, April 5, 2021 12:46:39 PM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

You're welcome Brian :)
Erik  
#7 Posted : Thursday, April 8, 2021 3:33:36 PM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

Unfortunately, it doesn't change the fact that the noise get's back as soon as i insert the OTTO in the I2S circuit.
Changed the powersupply for the OTTO to battery, used coax or straight wire, short or longer, unused inputs are connected to ground, resistorbanks soldered. Nothing helped.
The location of the OTTO doesn't change the noise. Switching works fine.

To be short, everything works fine without the OTTO switch: toslink> S/PDIF Transceiver Module >B2 DAC version 1.0

I'm out of options and about to cancel my project for more inputs.

Edited by user Thursday, April 8, 2021 3:39:08 PM(UTC)  | Reason: Not specified

Erik  
#8 Posted : Sunday, April 25, 2021 10:18:30 AM(UTC)
Erik

Rank: Member

Groups: Member
Joined: 3/26/2021(UTC)
Posts: 6
Netherlands

Changed the FST3257 for a pin compatible 74HC157, works like a charm.
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.