Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
stewart  
#1 Posted : Tuesday, March 3, 2020 3:56:46 PM(UTC)
stewart

Rank: Advanced Member

Groups: Member
Joined: 11/10/2008(UTC)
Posts: 137
Location: New York City

Thanks: 1 times
Brian/Russ and others--

I'm curious how you recommend cleaning flux off of the pcb boards. I've tried isopropyl alcohol and also techspray flux remover and brushing with a horsehair brush but both approaches often leave the boards cloudy. I'm not sure if any of the twistedpear boards are still soldered by hand, but they've always been sparkling clean when received.

How do you clean them?
Brian Donegan  
#2 Posted : Tuesday, March 3, 2020 4:51:38 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
That's really going to depend on the type of flux you use. Some are water soluble, others not.

I use solder paste (smt) and solder (hand soldering) with "no-clean" flux, and a "no-clean" flux pen. This is a light-weight flux that burns off very quickly, but is also not very acidic, so leaving it on the board does not result in long-term damage like heavier fluxes (acid slowly dissolving metal traces). It cleans up easily with isopropyl alcohol.

I also use an ultrasonic cleaner when I have to clean smt stencils or very dirty circuit boards. For a cleaning solution, I use water with a "glug" of stencil cleaner.

Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.