Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
pelliott123  
#1 Posted : Monday, December 22, 2008 1:16:30 PM(UTC)
pelliott123

Rank: Member

Groups: Member
Joined: 8/6/2008(UTC)
Posts: 128
Location: Baltimore, MD USA

I know you guys are supposed to be on n vacation and I hope you have a happy holiday.

I am in the process of building my Buffalo/IVY combo I recently received (thanks for the quick shipping!!!)

The two power supplies went together fine and voltages check out. I really like the way you package the parts, it makes assembly go very smooth.

When I got to the IVY I have some confusion with parts supplied or maybe missing.

From my reading of the forum I believe the favored build is the Buffalo l config.
Well I did not get C1-C4 10nf caps called for.
I did get C13-C16 which should be omitted according to the manual

I also got R17-R20 that are the Jumpers 0 ohms as what should have been 21 ohm according to the manual.

Did I miss something

Also I am retuning a Toslink kit. You sent me two of them
Russ White  
#2 Posted : Tuesday, December 23, 2008 7:39:43 AM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
The manual needs to be updated. You should go ahead and use C13-C16 and the jumpers.

Thanks for returning the extra kit!

Cheers!
Russ
pelliott123  
#3 Posted : Tuesday, December 23, 2008 7:50:22 AM(UTC)
pelliott123

Rank: Member

Groups: Member
Joined: 8/6/2008(UTC)
Posts: 128
Location: Baltimore, MD USA

Thanks for the quick reply

I will be able to finish the build this coming weekend and a first listen on Sunday afternoon after some burn in time.

What would be a good test load for the power supplies. They have held a steady no load voltage for a couple of days now but would like to put them on load with out the Buffalo or IVY

The extra toslink kit will be the mail on Satuerday
pelliott123  
#4 Posted : Tuesday, December 23, 2008 7:52:22 AM(UTC)
pelliott123

Rank: Member

Groups: Member
Joined: 8/6/2008(UTC)
Posts: 128
Location: Baltimore, MD USA

What about C1-C4?
Brian Donegan  
#5 Posted : Tuesday, December 23, 2008 8:01:00 AM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
I apparently left C1-C4 out of your kit. Sending.
pelliott123  
#6 Posted : Tuesday, December 23, 2008 10:03:55 AM(UTC)
pelliott123

Rank: Member

Groups: Member
Joined: 8/6/2008(UTC)
Posts: 128
Location: Baltimore, MD USA

Thanks
BacR  
#7 Posted : Thursday, December 25, 2008 11:04:12 PM(UTC)
BacR

Rank: Member

Groups: Member
Joined: 12/15/2008(UTC)
Posts: 4
Location: Rockville,MD

Russ White wrote:
The manual needs to be updated. You should go ahead and use C13-C16 and the jumpers.


Hi Russ,

I have R17-20 and R5-8 jumpers. Is it correct?
What is filter frequency in the new configuration?

Thank you,

Vassili
Russ White  
#8 Posted : Friday, December 26, 2008 3:24:47 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Correct on the jumpers.

The Fc is almost the same, just the Q is different. :)

Edited by user Friday, December 26, 2008 3:25:18 PM(UTC)  | Reason: Not specified

pelliott123  
#9 Posted : Saturday, December 27, 2008 10:26:42 AM(UTC)
pelliott123

Rank: Member

Groups: Member
Joined: 8/6/2008(UTC)
Posts: 128
Location: Baltimore, MD USA

I hope you had a great Christmas with friends and family.
I received the caps yesterday, thanks for the quick service. I put the toslink in 1st class on friday back to you.
Caps installed hooked up the PS said a prayer, flipped the switch, auto mute light came on, and no smoke, rechecked voltages. Let it cook over night, rechecked the voltages first thing this morning, moved it over to the system, hooked up my source through SPDIF and the lock light came on and the music came on!!!
Sounds great, hoping for some mellowing with burn-in, but very clear and clean, makes my MF XDAC sound like a muddy toy.
I found building this a bit of a challenge because I am just not use to such small PCB's to work with. These 63 year old fingers just do not move like they use to. You made it workable because of the great labeling of parts and PCB. I put the PS's in a separate box and made a cable with seven strands or 14ga wire shielding from a stripped RG8 coax covered with texflex, a bit stiff but doable. Now to come up with case work suitable for this great sounding DAC.
I will probably add MUX because I have two SPDIF sources and will give the Placid a try when its available.
Happy listening, I am.
Paul
Russ White  
#10 Posted : Sunday, December 28, 2008 9:58:07 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
Very good Paul!

I am glad you are enjoying it.

Cheers!
Russ
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (3)
Similar Topics
Dual mono IVY config, using single ended also. (IVY I/V Stage)
by astro888 10/6/2016 10:59:23 AM(UTC)
COD Dual Mono - IVY Configuration (COD DAC Module)
by free2dev 5/19/2010 6:02:26 PM(UTC)
ivy config for driving headphones and powered monitors directly (IVY I/V Stage)
by qusp 8/4/2009 5:58:18 AM(UTC)
Novice asking for IVY configs (General Questions)
by Gnome 7/19/2009 8:55:44 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.