Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
deafbykhorns  
#1 Posted : Friday, December 16, 2011 8:52:05 PM(UTC)
deafbykhorns

Rank: Advanced Member

Groups: Member
Joined: 11/17/2011(UTC)
Posts: 41
Location: Florida

Running a Placid to power Buffalo III
Manual says to run a larger heatsink when installing the tridents.
Probably going to change the ones on the Placid BP powering the Legato, just seems way too hot
Brian Donegan  
#2 Posted : Friday, December 16, 2011 10:57:06 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
That needs to be amended. The standard heatsinks will be fine powering the Buffalo-III with Tridents.
LeonvB  
#3 Posted : Saturday, December 17, 2011 12:54:42 AM(UTC)
LeonvB

Rank: Member

Groups: Member
Joined: 5/23/2010(UTC)
Posts: 708
Location: Netherlands

Thanks: 2 times
Was thanked: 48 time(s) in 45 post(s)
The manual speaks of the original Placid version running a Buffalo with Tridents. Depending on the configuration bigger heatsinks may be needed in that case, as that version was originally intended for loads up to 400mA.

In this case: for a Placid BP the load of a Legato may be a bit on the high side, certainly if you are using the Legato with a buffer. The newer HD BP version or running one with bigger heatsinks are solutions. But please check your temperatures before making a decision: the Placid series are shunt regulators, and as such are designed to dissipate the energy you don't use. High temperatures are a feature. It's impossible to tell if it's too hot without hard data.

@Brian: we could use more information on this part, this is a fairly common question. Fi. which heatsink temperature do you consider ok for running over long periods, what are the practical limits of the various versions under normal conditions.
deafbykhorns  
#4 Posted : Saturday, December 17, 2011 2:55:15 PM(UTC)
deafbykhorns

Rank: Advanced Member

Groups: Member
Joined: 11/17/2011(UTC)
Posts: 41
Location: Florida

So what is the maximum allowed temperature?
I'll test it tonight
Russ White  
#5 Posted : Saturday, December 17, 2011 10:16:25 PM(UTC)
Russ White

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 3,979
Location: Nashville, TN

Thanks: 25 times
Was thanked: 89 time(s) in 83 post(s)
If you get above 80C then you might consider larger heat sinks. :)
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.