Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Options
View
Go to last post Go to first unread
wadsbrau  
#1 Posted : Friday, June 27, 2008 12:44:58 PM(UTC)
wadsbrau

Rank: Member

Groups: Member
Joined: 7/13/2007(UTC)
Posts: 27
Location: Tacoma, WA

Is the 5v dc that is applied to the OTTO a constant voltage that switches to the other input will streaming the voltage to it? Then when the voltage is stopped, it switches back to the normally closed?

Or is it momentary?

Not sure how it works.

Thanks
Darren
Brian Donegan  
#2 Posted : Friday, June 27, 2008 1:36:50 PM(UTC)
Brian Donegan

Rank: Administration

Groups: Administration, Customer
Joined: 10/24/2006(UTC)
Posts: 2,868
Location: Massachusetts, USA

Thanks: 2 times
Was thanked: 141 time(s) in 134 post(s)
The 5V and GND power the relay. The TR pin accepts a 5V trigger to activate the relay. If you remove the 5V, the relay disengages. The reason for using the trigger instead of just using a straight 5V to the relay is to allow it to be triggered by something that can't supply enough current for the relay coil, such as a logic or micro-controller output. The trigger circuit (simple resistor and transistor switch) is high impedance, so current draw is minimal. If you wanted to use it by switching the 5V power directly, you could just tie the 5V pin to the TR pin.
akione  
#3 Posted : Saturday, June 28, 2008 1:05:29 AM(UTC)
akione

Rank: Advanced Member

Groups: Member
Joined: 2/8/2008(UTC)
Posts: 33
Location: U.K.

Hi, Darren

I don't know if it's of any interest to you, but I'm using one with the TR and 5V permanently connected to the 5V
supply and switching it by grounding in the same way as the Darwin does. Actually, I have it switched from a little
circuit that lets me use a momentary switch.

Colin
Rss Feed  Atom Feed
Users browsing this topic
GuestUser (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.